Samsung Printer Error Codes & Troubleshooting

Here are some of the common error codes along with tips on troubleshooting:

Scanning error: This error message is essentially a hardware error. Due to poor quality of cables large data needed by a scanner cannot transmitted. You can replace USB cable and try.

Paper jam: This happens when the paper has got stuck in your Printer. You need to check the sensor located beside exit rollers. Maybe it is in incorrect position, or is damaged. If nothing works, try replacing it with a new sensor.

Square prints: Sometimes you may experience that your Printer is printing out squares instead of regular text. It can happen if you are using Firefox or printing content from sites which do not recognize the font used in the text. To fix this problem you will need to reinstall all relevant drivers. If this doesn’t help then visit the printers and faxes folder, select your printer and choose the properties. Choose the Advanced option in the dialog box and select the print processor. Choose a different mode of graphics and try testing a page for printing.

Missing print: Sometimes, a portion of your page could be devoid of print. It can happen because of incorrect paper size configuration. Check the settings and try again.

Media tray empty: Sometimes even if the tray is loaded with paper you could be getting this error message on your Printer. Try updating the drivers by visiting the Samsung site. This should rectify issues.

Toner light still on: After replacement of the toner cartridge you might still find the toner light switched on continually. You need to check on the fuse located on the front side of the cartridge. You could try replacing this with a 50 mp one. This error usually occurs in the Samsung SCX-4216F.

Error code: H2: This error code indicates that there is a problem with the fuser warming up. Make sure all the cables are in connection and that no point is missing.

Error code: 24: This error code indicates that there is too much overload as far as the print job is concerned. You can select the button called ‘continue’ and then try reducing the amount of print job. You could also try adding on memory.

Error code: 50: This indicates a malfunction in the fuser. It means the fuser is not heating up. Try switching off your Samsung Laser Printer for around 15 minutes and then switch it on again. In case this does not solve the problem, it could indicate a fault in the fuser assembly or in the AC power.

Error code: 16: This error code means that the toner is low. That means the distribution of the toner inside the cartridge is inadequate. You need to take out the cartridge and move it back and front gently. If this does not work try replacing the cartridge. You could also try cleaning up the contacts.